There are various reasons why water analysis is necessary in industry or in the laboratory. Whether for process or quality control, microfluidic systems find their application in many places. Bartels components offer a particularly modular, small and lightweight solution here. Therefore, the finished systems can be integrated into existing machines without much effort.

Water analysis in process control

In most industries a custom-fit process control is the key to ensuring optimum levels of reliability and efficiency. Today, processing systems are under increasing pressure to achieve productivity and cost efficiency without compromising quality. Improved control and monitoring reduce waste of expensive materials.

Microfluidics can be very helpful here. With the help of a simple water analysis of, for example, the coolant used, it can be determined whether the system has any leaks. Or it can be tested whether there are hazardous pollutants in the wastewater. These and other applications can be made possible with the mp6 micropump and other microfluidic components from Bartels.

Easy identification of liquids

A lot of times, water ananlysis is useful in lab and point of care applications. It is often crucial to know exactly which fluid is currently in the system. The identification of a liquid or a mixture is important in microfluidics for a variety of reasons:

  • The performance of a micropump is viscosity dependent.
  • The exact degree of mixing of two liquids is to be controlled.
  • The entire process depends on the fluid currently used.

Here, one option is the measurement of the thermal conductivity. For this purpose, there is a sensor which briefly heats the liquid. The value determined in this way can then be used to name the exact liquid or mixture.

We have gathered our knowledge in this area in a video on thermal conductivity and a Case Study on the identification of liquids and mixtures. So, read more about how Bartels components can be used in water analysis here.

Build your own water analysis system

The basis of microfluidics system is the mp6 micropump and the corresponding controller electronics (the mp-Multiboard2 and an associated driver). The system is then supplemented with valves and sensors, which can perform the necessary tests for the water analysis. You can buy all Bartels components individually. Or you can opt for one of our kits. Here we have already put together everything you need.

You are not quite sure yet what you need? Then please feel free to contact us.

The mp6 micropumps reliably pump gases, liquids and mixtures. Buy now and test for your application!
mp6 micropumps – miniaturized double diaphragm pumps
mp6 micropumps mp6-liq mp6-gas mp6-gas+
336,00 399,00 

excl. VAT

Delivery time: Prepayment delivery

Select options
The mp-mf Mounting frame is a frame for mounting the mp6 micropump. This mp6 mount is quick and easy to install.
mp-mf mount for the mp6 micropump
mp-mf mounting frame excluding screws
5,25 

excl. 19% VAT

Delivery time: Prepayment delivery

Add to basket
Our microfluidic pump with the mp-basic kit
mp-basic kit for microfluidic Pumps
  • mp6 micropumps
  • mp-t tubing
  • mp-hc host clamps
  • evaluation board mp-Multiboard2 (including Micro-USB cable) and four driver chips: mp-Lowdriver mp-Driver mp-Highdriver mp-Highdriver4
870,45 

excl. 19% VAT

Delivery time: Prepayment delivery

Add to basket
microfluidic driver chips
microelectronic for the mp6 micropump
Microelectronic for the mp6 micropump mp-Lowdriver mp-Highdriver mp-Highdriver4 mp-Driver
58,70 166,95 

excl. VAT

Delivery time: Prepayment delivery

Select options
mp-advance Set for your complete microfluidic system
mp-advance kit – complete microfluidic system
  • mp6 micropumps
  • mp-t tubing
  • mp-hc host clamps
  • flow sensor(SLF3s-0600F) with connectors
  • mp-damper
  • preassembled pressure sensor
  • mp-valvedriverT including 2 active valves
  • microfluidic chip
  • evaluationboard mp-Multiboard2 (including Micro-USB Kabel and power supply) and four driver chips: mp-Lowdriver mp-Driver mp-Highdriver mp-Highdriver4
1.468,95 

excl. 19% VAT

Delivery time: Prepayment delivery

Add to basket
The mp-f filter protects the microfluidic system from unwanted particles and contaminants.
26,25 

excl. 19% VAT

Delivery time: Prepayment delivery

Add to basket
microfluidic kit for the testing of our mp6 micropump
mp-select kit for mircofluidic Systems
  • mp6 micropumps
  • mp-t tubing
  • mp-hc host clamps
  • Evaluationboard mp-Multiboard2 (including Micro-USB cable)
  • options: mp-Lowdriver mp-Driver mp-Highdriver mp-Highdriver4
582,65 1.094,10 

excl. VAT

Delivery time: Prepayment delivery

Select options
The mp-damper is a pulsation damper that reduces the pulsation of liquids from micropumps. This allows flow sensors to measure more accurately.
26,25 

excl. 19% VAT

Delivery time: Prepayment delivery

Add to basket
liquid flow sensor
Liquid flow sensors
liquid flow sensor incl mp-damper
233,10 

excl. VAT

plus Shipping costs

Delivery time: Prepayment delivery

Select options
pressure sensor
Pressure sensor for liquids and gases
pressure sensor for the mp-Multiboard2
51,45 

excl. 19% VAT

plus Shipping costs

Delivery time: Prepayment delivery

Add to basket
The mp-Multiboard2 connects your components to form a functional microfluidic system. Highly flexible thanks to the modular design.
mp-Multiboard2 for microfluidic systems
mp-Multiboard2 evaluationboard incl. micro-USB-cable connection cable with mp6 micropump excluding driverchip!
271,95 

excl. 19% VAT

Delivery time: Prepayment delivery

Add to basket
The Tygon tubing with an inner diameter of 1.3 mm is the preferred tubing for the mp6 micropump and our other components.
9,98 

excl. 19% VAT

Delivery time: Prepayment delivery

Add to basket