mp-Lab! kit


  • mp6 micropumps
  • mp-t tubing
  • mp-hc host clamps
  • controller:
    mp-Labtronix (including power supply, mp6-con cable, USB-cable)

Delivery time: Prepayment delivery

Out of stock

SKU: mp-lab! Set Category: Tags: , , ,


mp-Lab! kit – micropump control for your lab

You want to see how our mp6 micropump can be used in your lab? Then take a look at our mp-Lab! kit.

With the micropump control mp-Labtronix you act comfortably in laboratory applications with micropumps, but also for intensive test series or if you are not so familiar with the secrets of electronics.

The micropump control included in this kit is our mp-Labtronix, a larger laboratory box with extensive testing capabilities. The mp-Labtronix has a much more flexible desktop controller instead of a driver, such as in the mp-basic set. At the control unit, the frequency and voltage can be entered via pushbuttons and shown on the display. It is worth mentioning that the signal form can be switched. Also the box can also be controlled externally via a USB connection.

With this system specially designed for laboratory use, you can easily adjust the frequency, amplitude and the waveform on the knobs and toggle switches to achieve the desired change in the flow or pressure values of the micropumps.

The mp-Lab! Set includes mp6 micropumps in addition to the micropump controller. The micropumps of the mp6 series are miniaturized double diaphragm pumps. Operated with two piezo actuators each, this space- and energy-saving design is very cost-effective and versatile due to the materials used. In particular, the variably adjustable flow rate is a factor that enables the wide-ranging applications of these micropumps.

In this kit for laboratory applications, you will also receive a USB cable for connection to your PC and a power cable for the power supply as well as an mp6-con cable to connect the pump. The matching hose as well as hose clamps are also included.


The micropump control in the mp-Lab! Set allows a quick and comprehensive initial test to determine if the mp6 micropumps are a useful addition to your lab application.



You have not found what you are looking for or you still have open questions?
Then feel free to have a look at our FAQ page or contact us directly via our contact form on our contact page. We will get back to you as soon as possible.

Additional information

Weight 2 kg

Bartels Mikrotechnik GmbH

Technical data

mp-Lab! evaluation-kit containing:

*6 piezoelectric double diaphragm pump
Product in compliance with RoHs directive.

*1 mp-Labtronix controller for micropump
connector for one mp6-series micropump,
usb interface includin driver software,
including power plug and manual.
Product in compliance with EMC directive 89/336/EEC and RoHs directive.

*1 mp6-con connection cable

*1 m mp-t ID 1.3 Tygon® Tubing

*1 pu Micro Hose Clamp mp-hc
packaging unit: 10 pieces

Customs tariff codes:
mp6 84135040
mp-Labtronix 85432000
mp6-con 85444290
mp-t 40161000
mp-hc 39174000


You can find more technical data in the data sheet or in the download area on our homepage


All needed documentations, manuals, software are available on our homepage in the download section

You may also like…

mp-advance Set for your complete microfluidic system
mp-advance kit
  • mp6 micropumps
  • mp-t tubing
  • mp-hc host clamps
  • flow sensor(SLF3s-0600F) with connectors
  • mp-damper
  • preassembled pressure sensor
  • mp-valvedriver including 2 active valves
  • microfluidic chip
  • evaluationboard mp-Multiboard (including Micro-USB Kabel) and three driver chips: mp-Lowdriver mp-Higherdriver mp-Highdriver4

excl. 19% VAT

Delivery time: Prepayment delivery

Add to basket
microfluidic kit for the testing of our mp6 micropump
mp-select kit
  • mp6 micropumps
  • mp-t tubing
  • mp-hc host clamps
  • Evaluationboard mp-Multiboard (including Micro-USB cable)
  • options:
477,65 1.116,15 

excl. VAT

Delivery time: Prepayment delivery

Select options
Our microfluidic pump with the mp-basi kit
mp-basic kit
  • mp6 micropumps
  • mp-t tubing
  • mp-hc host clamps
  • evaluation board mp-Multiboard (including Micro-USB cable) and three driver chips: mp-Lowdriver mp-Higherdriver mp-Highdriver4

excl. 19% VAT

Delivery time: Prepayment delivery

Add to basket