mp-select Kit – for customised solutions

667,001.004,85

  • 6x The Bartels Pump | BP7 – Tubing
  • 1x mp-Multiboard2 Evaluation Board
    including cable harness for The Bartels Pump | BP7 – Tubing and Micro USB cable
  • 1x 1m mp-t ID1.3 Tygon Tubing
  • 1x mp-hc Micro Hose Clamps
    Packaging Unit: 10 pieces
  • options:
    mp-Lowdriver Pump Driver
    mp-Driver Pump Driver
    mp-Highdriver Pump Driver
    mp-Highdriver4 Pump Driver

Clear selection

SKU: BM-S-0008 Category:

mp-select Kit– Mix and match for your microfluidic kit

You need maximum flexibility in your personal microfluidics kit? Then start with the mp-select kit!

 

The basis of this set includes The Bartels Pump | BP7 – Tubing and the mp-Multiboard2. You then decide which driver chips you need in particular. Afterwards you add further necessary products from our store. How about a flow sensor or a pressure sensor? Suitable active valves can be added with our NC Valvebundle or Bistable Valvebundle to make the set complete according to your requirements. We also offer other accessories like alternative tubing, hose clamps, bubble traps and reservoirs.

The Bartels Pump | BP7 – Tubing: The micropumps from The Bartels Pump | BP7 – Tubing series are miniaturized double diaphragm pumps. Each micropump is run by two piezo actuators. Due to the space- and energy-saving construction they are cost-effective even in high quantities. The materials used make the micropumps remarkably versatile. Variable flow rate adjustment guarantees a wide range of possible applications.

mp-Multiboard2: The mp-Multiboard2 is an evaluation board that allows controlling one of our I²C controlled pump-drivers (mp-Driver, mp-Lowdriver, mp-Highdriver, mp-Highdriver4) through an ESP32 microcontroller. Up to six The Bartels Pump | BP7 – Tubing can be directly connected to the board.

Driver options: You have the choice between the mp-Driver, mp-Lowdriver, the mp-Highdriver and the mp-Highdriver4 – depending on your application area:

  • The mp-Highdriver and the mp-Highdriver4 are best suited for higher flow rates. With the Highdriver you can control one pump, while with the Highdriver4 you can control up to four The Bartels Pump | BP7 – Tubing.
  • With the mp-Lowdriver you can control one micropump in lower flow rates.
  • The mp-Driver convinces with a particularly high accuracy at medium flow rates.

 

Assemble your own microfluidic kit now!


You have not found what you are looking for or you still have open questions?
Then feel free to have a look at our FAQ page or contact us directly via our contact form on our contact page. We will get back to you as soon as possible.

Technical data

mp-advance kit- the allrounder

*6 Piezoelektrische Doppel-Membranpumpe
Product in compliance with RoHs directive.

*1 mp-Multiboard2 – Evaluierungsboard für Arduino
It runs all driverchips mp-Driver, mp-Lowdriver, mp-Highdriver, mp-Highdriver4
Including cable for the connection of the mp6 micropumps

*1 m mp-t Tygon tubing for micropump

*1 Micro-USB cable

*1 pu host clampsmp-hc
packaging unit: 10 pieces


Optional components:

*1 mp-Lowdriver
Output for one micropump of the mp6-series

*1 mp-Driver
Output for one micropump of the mp6-series

*1 mp-Highdriver
Output for one micropump of the mp6-series

*1 mp-Highdriver4
pump driver for driving up to four micropumps simultaneously


Customs tariff code
mp-Multiboard2 85423990
mp-Highdriver 85423990
mp-Driver 85423990
mp-Lowdriver 85423990
mp-Highdriver4 85423990
mp6 84135040
mp-t 39173200
mp-hc 39174000

Data sheets

Click to download relevant

Data Sheets for software,

Data Sheets for electronics,

Data Sheets for accessories and

Data Sheet for micropumps.

Video

YouTube

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

YouTube

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

YouTube

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

YouTube

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

You may also like…

mp-advance Kit – The Allrounder
mp-advance Kit – The Allrounder
  • 6x The Bartels Pump | BP7 - Tubing
  • 1x mp-Multiboard2 Evaluation Board Including cable for the connection of The Bartels Pump | BP7 - Tubing and Micro USB cable
  • 1x mp-Lowdriver Pump Driver
  • 1x mp-Highdriver Pump Driver
  • 1x mp-Driver Pump Driver
  • 1x mp-Highdriver4 Pump Driver
  • 1x SLF3S-0600F Flow Sensor by Sensirion including cable and fluid connectors
  • 2x mp-damper Pulsation Damper
  • 1x Pressure Sensor
  • 1x mp-valvedriverT with 2 active Takasago valves including cable connection
  • 1x Straight Channel Chip 560 by microfluidic ChipShop
  • 1x Microfluidic Chip Connectors by Microfluidic ChipShop Packaging Unit: 10 pcs.
  • 1x 1 m mp-t ID 1.3 Tygon tubing
  • 1x mp-hc Micro Hose Clamps Packaging Unit: 10 pcs.
  • 1x Power Supply USB C
1.669,00

excl. VAT

Add to basket
mp-advance Kit – The Allrounder
mp-advance Kit – The Allrounder
  • 6x The Bartels Pump | BP7 - Tubing
  • 1x mp-Multiboard2 Evaluation Board Including cable for the connection of The Bartels Pump | BP7 - Tubing and Micro USB cable
  • 1x mp-Lowdriver Pump Driver
  • 1x mp-Highdriver Pump Driver
  • 1x mp-Driver Pump Driver
  • 1x mp-Highdriver4 Pump Driver
  • 1x SLF3S-0600F Flow Sensor by Sensirion including cable and fluid connectors
  • 2x mp-damper Pulsation Damper
  • 1x Pressure Sensor
  • 1x mp-valvedriverT with 2 active Takasago valves including cable connection
  • 1x Straight Channel Chip 560 by microfluidic ChipShop
  • 1x Microfluidic Chip Connectors by Microfluidic ChipShop Packaging Unit: 10 pcs.
  • 1x 1 m mp-t ID 1.3 Tygon tubing
  • 1x mp-hc Micro Hose Clamps Packaging Unit: 10 pcs.
  • 1x Power Supply USB C
1.669,00

excl. VAT

Add to basket