Description
mp6-chemical-basic set
If your application involves the pumping of aggressive liquids, we recommend our mp6-chemical set, provided you are familiar with electronics. Then this is the right set for you.
With the electronics mp6-EVA – it gets its current via the USB interface of your PC – you can set the voltage and frequency directly on the board.
This is possible with the different jumpers.
Thus the mp6-EVA board is the optimal choice for first tests.
You can connect the mp6-EVA directly to the pump via the built-in Molex connector.
Hose (mp-t) and hose connector (mp-hc) are sufficiently included in the set.
The set contains the standard pump mp6-liq, as this pump made of the PPSU material is already well applicable with many chemicals.
In addition, the pump variants mp6-PI – made of the PPSU material – are available with a valve foil made of the polyethylene material (PI).
We recommend this micropump especially for pumping certain liquids such as alcohol mixtures.
A further special variant, which has established itself in the pumping of aggressive fragrances, is the mp6-PP, made of the material polypropylene (PP).
Our micropumps are used in a wide variety of applications – the liquids to be pumped are just as diverse.
With this set you can easily find out which of our micropumps is the right one for your application with aggressive media.
Technical data (basic)
mp6-chemical-basic evaluation-set containing:
Piezoelectric double diaphragm pump (2x mp6-liq, 2x mp6-pi, 2x mp6-pp)
- mp6-liq
material in fluid contact: Poly Phenylene Sulphone (PPSU)
dimensions: 30 x 15 x 3.8 mm³ without fluid connectors
fluid connectors: barbed tube connector; outer diameter 1.9 mm
electrical connector: flexible printed circuit
typical performance:
controlable volume range: 8 µl/min – 10000 µl/min
volume flow: typ. 8 ml/min
back pressure: typ. 500 mbar
(data taken with DI water, settings of the extended controller: 100 Hz, 250 V, SRS signal).
- mp6-PI
material in fluid contact: Poly Phenylene Sulphone (PPSU), Polyimide (PI)
valve foil consists of PI, other components consists of PPSU
dimensions: 30 x 15 x 3.8 mm³ without fluid connectors
fluid connectors: barbed tube connector; outer diameter 1.9 mm
electrical connector: flexible printed circuit
typcial performance:
controlable volume range: 8 µl/min – 8000 µl/min
volume flow: typ. 6 ml/min
back pressure: typ.500 mbar
(data taken with DI water, settings of the extended controller: 100 Hz, 250 V, SRS signal).
- mp6-PP
material in fluid contact: Polypropylen (PP)
dimensions: 30 x 15 x 3.8 mm³ without fluid connectors
fluid connectors: barbed tube connectors; outer diameter 1.9 mm
electrical connector: flexible printed circuit
typcial performance for liquids:
controlable volume range: 8 µl/min – 5000 µl/min
volume flow: typ.4 ml/min
back pressure: typ.500 mbar
(data taken with DI water, settings of the extended controller: 100 Hz, 250 V, SRS signal).
- mp6-EVA
Evaluationboard for controller mp6-OEM
The board includes one controller mp6-OEM
Dimensions approx. 30 x 65 x 20 mm³
Power supply externally or via USB
Amplitude and frequency can be adjusted by external circuitry.
- mp-t ID1.3
Tygon® Tubing for micropump
Inner diameter 1.3 mm
- Mini-USB cable
- Software and driver
- Micro Hose Clamp mp-hc
Leakproof tube connection that fits perfectly on the tubing mp-t (1.3mm id; 3mm od) over the mp6-series barbs.
The clips are easy to mount.
Full-plastic (PPSU) and reusable
Customs tariff code
mp6-EVA 85432000
mp6 84135040
mp-t 39173200
mp6-mol 85369010
mp-hc 39174000
You can find more technical data in the data sheet or in the download area on our homepage
Datasheets
All needed documentations, manuals, software are available on our homepage in the download section
