Back to Lowflow sets

mp6-lowflow-basic set


  • 3 pumps
  • 1 m mp-t tubing
  • 1 pu mp-hc host clamps
  • 10 cm restrictor
  • 1 x Controller:


Delivery time: 1-3 working days

Out of stock

SKU: mp6-lowflow-basic Set Categories: , Tags: , , ,


mp6-lowflow-basic Set

This set has been specially designed for your application with very low flow rates.

In order to work with the selected electronics mp6-EVA, you should already be familiar with electronics.
So you can start with your tests without much effort.
With the electronics mp6-EVA – it gets its current via the USB interface of your PC – you can set the voltage and frequency directly on the board.
This is possible via the different jumpers.  Thus the mp6-EVA board is the optimal choice for first tests.

The electronics can be connected directly to the pump via the built-in Molex plug.
Hose (mp-t) and hose connector (mp-hc) are sufficiently included in the set.

The set contains three of our standard micropumps mp6.
The special feature of this set is the included restrictor, which reduces the flow rate beyond the possibilities offered by the electronics.
The chosen restrictor is only an example, shorter and longer variants are possible.
Please keep in mind that the viscosity of your medium also has an effect on the flow rate.


Additional information

Weight 0.5 kg
Dimensions 20 × 15 × 10 cm

Technical data (basic)

mp6-lowflow-basic evaluation-set containing:

Piezoelectric double diaphragm pump (mp6)

  • mp6
    material in fluid contact: Poly Phenylene Sulphone (PPSU)
    dimensions: 30 x 15 x 3.8 mm³ without fluid connectors
    fluid connectors: barbed tube connector; outer diameter 1.9 mm
    electrical connector: flexible printed circuit
    typical performance:
    controlable volume range: 8 µl/min – 10000 µl/min
    volume flow: typ. 8 ml/min
    back pressure: typ. 500 mbar
    (data taken with DI water, settings of the extended controller: 100 Hz, 250 V, SRS signal).
  • mp6-EVA
    Evaluationboard for controller mp6-OEM
    The board includes one controller mp6-OEM
    Dimensions approx. 30 x 65 x 20 mm³
    Power supply externally or via USB
    Amplitude and frequency can be adjusted by external circuitry.
  • mp-t ID1.3
    Tygon® Tubing for micropump
    Inner diameter 1.3 mm
  • Mini-USB cable
  • Software and driver
  • Micro Hose Clamp mp-hc
    Leakproof tube connection that fits perfectly on the tubing mp-t (1.3mm id; 3mm od) over the mp6-series barbs.
    The clips are easy to mount.
    Full-plastic (PPSU) and reusable
  • restrictor
    For the use with the tubing mp-t (1.3mm id; 3mm od) to lower the flowrate; reusable.

Customs tariff code
mp6-EVA 85432000
mp6 84135040
mp-t 39173200
mp6-mol 85369010
mp-hc 39174000


You can find more technical data in the data sheet or in the download area on our homepage


All needed documentations, manuals, software are available on our homepage in the download section