Our mp6-Quadbasic set is ideal for realizing complex control tasks at low flow rates.
With the help of the integrated Arduino you can easily and quickly operate several pumps (up to 4) simultaneously and select the frequency, voltage and signal form.
The user interface guarantees easy handling and the possible shapes are sine, rectangular and trapezoidal signals.
The set contains three of our standard micropumps mp6.
The special feature of this set is the included restrictor, which reduces the flow rate beyond the possibilities offered by the electronics.
The chosen restrictor is only an example, shorter and longer variants are possible.
Please keep in mind that the viscosity of your medium also has an effect on the flow rate.
Technical data (basic)
mp6-Quadbasic evaluation-set containing:
Piezoelectric double diaphragm pump (mp6)
material in fluid contact: Poly Phenylene Sulphone (PPSU)
dimensions: 30 x 15 x 3.8 mm³ without fluid connectors
fluid connectors: barbed tube connector; outer diameter 1.9 mm
electrical connector: flexible printed circuit
controlable volume range: 8 µl/min – 10000 µl/min
volume flow: typ. 8 ml/min
back pressure: typ. 500 mbar
(data taken with DI water, settings of the extended controller: 100 Hz, 250 V, SRS signal).
evaluation board for Arduino for the simultaneous control of up to four micropumps
dimensions 92 x 46 x 23 mm³
power supply 7.5 – 12 VDC
amplitude, frequency and signal shape are variable
- mp-t ID1.3
Tygon® Tubing for micropump
Inner diameter 1.3 mm
- Mini-USB cable
- Software and driver
- Micro Hose Clamp mp-hc
Leakproof tube connection that fits perfectly on the tubing mp-t (1.3mm id; 3mm od) over the mp6-series barbs.
The clips are easy to mount.
Full-plastic (PPSU) and reusable
For the use with the tubing mp-t (1.3mm id; 3mm od) to lower the flowrate; reusable.
Customs tariff code
You can find more technical data in the data sheet or in the download area on our homepage
All needed documentations, manuals, software are available on our homepage in the download section