Our mp6-Quadbasic Set is ideal for the realization of complex control tasks.
With the help of the integrated Arduino you can easily and quickly operate several pumps (up to 4) simultaneously and select the frequency, voltage and signal form.
Possible shapes are a sine, a square wave and a trapezoidal signal. The user interface guarantees easy handling.
To help you find out which micropump is right for your application, we offer two different types of pumps in the set.
In this set are mp6-liq micropumps, with which you achieve our guaranteed standard values when pumping water or air.
If you need a higher suction pressure, we recommend – also for liquid applications – the mp6-gas: It is especially measured for gas and is a special “performer” in this field.
The set also includes two mp6-gas+ pumps, which we particularly recommend for applications with high pressure in the gas range.
Of course the set also includes hose (mp-t) and hose connector (mp-hc).
Technical data (basic)
mp6-Quadbasic evaluation-set containing:
Piezoelectric double diaphragm pump
- material in fluid contact: Poly Phenylene Sulphone (PPSU)
dimensions: 30 x 15 x 3.8 mm³ without fluid connectors
fluid connectors: barbed tube connector; outer diameter 1.9 mm
electrical connector: flexible printed circuit
controlable volume range: 8 µl/min – 10000 µl/min
volume flow: typ. 8 ml/min
back pressure: typ. 500 mbar
(data taken with DI water, settings of the extended controller: 100 Hz, 250 V, SRS signal).
volume flow: typ. 20ml/min
back pressure: typ. 100 mbar
(data taken with air, settings of the extended controller: 300 Hz, 250 V, SRS signal).
volume flow: typ. 20 ml/min
back pressure: typ. 150 mbar
(data taken with air, settings of the extended controller: 300 Hz, 250 V, SRS signal).Priming characteristic: suction pressure < 10 mbar; DI water; settings mp-x: 100 Hz, 250 V, SRS; the maximum flowrate is reached after a couple of minutes of operation.
evaluation board for Arduino for the simultaneous control of up to four micropumps
dimensions 92 x 46 x 23 mm³
power supply 7.5 – 12 VDC
amplitude, frequency and signal shape are variable
- mp-t ID1.3
Tygon® Tubing for micropump
Inner diameter 1.3 mm
- Mini-USB cable
- Software and driver
- Micro Hose Clamp mp-hc
Leakproof tube connection that fits perfectly on the tubing mp-t (1.3mm id; 3mm od) over the mp6-series barbs.
The clips are easy to mount.
Full-plastic (PPSU) and reusable
Customs tariff code
You can find more technical data in the data sheet or in the download area on our homepage
All needed documentations, manuals, software are available on our homepage in the download section