Accessories
Showing 1–8 of 10 results
![Mounting Kit for The Bartels Pump | BP7](https://bartels-mikrotechnik.shop/wp-content/uploads/2024/03/Fertig2-3-268x268.png)
Mounting Kit for The Bartels Pump | BP7
- 3D Printed Microfluidic Chip
- 3D Printed Mounting Frame
- Fluidic Connectors
- 4x O-Ring (1x0,4mm)
- 4x M2 6mm Screw
- 4x M2 Nut
excl. VAT
plus Shipping costs
Delivery time: 1 - 3 working days
Add to basket![The mp-f filter protects the microfluidic system from unwanted particles and contaminants.](https://bartels-mikrotechnik.shop/wp-content/uploads/2022/03/mp-f-2-268x268.png)
mp-filter Micro Filter
Our filter component for protection of the microfluidic device against particles
excl. VAT
Delivery time: 1 - 3 working days
Add to basket![Microfluidic Reservoir Bundle](https://bartels-mikrotechnik.shop/wp-content/uploads/2022/12/reservoir_bundle_QUA-1-scaled-268x268.jpg)
Microfluidic Reservoir Kit
includes: 1x Reservoir with screw cap, 2x Needles and 2x Tubing Connector
excl. VAT
plus Shipping costs
Delivery time: 1 - 3 working days
Add to basket![The Accessories Bundle includes our most popular microfluidic accessories for a number of different applications. It includes both of our tubing options (Tygon and silicone) as well as hose clamps and y-connectors.](https://bartels-mikrotechnik.shop/wp-content/uploads/2023/06/Accessories-Bundle-268x268.jpg)
Accesories Kit for your microfluidic systems
1x 1m mp-t ID1.3 Tygon Tubing
1x 1m mp-s ID1.0 Silicon Tubing
1x mp-hc Micro Hose Clamps
Packaging Unit: 10 Pieces
1x mp-y Tubing Connectors
Packaging Unit: 2 Pieces
excl. VAT
plus Shipping costs
Delivery time: 1 - 3 working days
Add to basket![A mp-bt bubble trap to remove gas bubbles from their microfluidic system.](https://bartels-mikrotechnik.shop/wp-content/uploads/2022/03/mpbt-FR-QUA-RS-scaled-268x268.jpg)
mp-bt Bubble Trap
Our Bubble Trap to remove bubbles from water-based solutions.
excl. VAT
Delivery time: 1 - 3 working days
Add to basket![The mp-damper is a pulsation damper that reduces the pulsation of liquids from micropumps. This allows flow sensors to measure more accurately.](https://bartels-mikrotechnik.shop/wp-content/uploads/2022/03/mp-Damper-268x268.png)
mp-damper Pulsation Damper
Our damper designed to reduce fluid pulsations.
excl. VAT
Delivery time: 1 - 3 working days
Add to basket![The mp-hc is a very small hose clamp that firmly attaches the hose to the individual components, especially the mp6 micropump.](https://bartels-mikrotechnik.shop/wp-content/uploads/2022/03/mphc-HGW-QUA-scaled-268x268.jpg)
mp-hc Micro Hose Clamps
Leakproof tube connection that fits perfectly on the tubing mp-t (1.3mm id; 3mm od) over our micropump barbs
Packaging unit: 10 pieces
excl. VAT
Delivery time: 1 - 3 working days
Add to basket![The Tygon tubing with an inner diameter of 1.3 mm is the preferred tubing for the mp6 micropump and our other components.](https://bartels-mikrotechnik.shop/wp-content/uploads/2022/03/t-zubeh-1-268x268.jpg)
mp-t ID1.3 – Tygon Tubing
Packaging unit: 1 meter
If longer units are required, please contact us via our contact form.
excl. VAT
Delivery time: 1 - 3 working days
Add to basket